|
• Don’t apply the removable tape adhesive side to your sensor filter.
• Don’t apply the wand base to the foam tape crooked or unaligned.
• Don’t remove the entire bottom liner and expose the ultra low adhesive.
• Don’t let the black foam touch anything before sensor application.
• Don’t expose the pad or tapes to UV light for long periods of time.
• Don’t store the adhesive pad outside of it’s sterile bag.
• Don’t misplace the wand/pad or you will have to buy a new DUST-AID kit.
• Don’t let the wand or foam tape touch the inner walls of your DSLR.
• Don’t lean the wand so the plastic touches the sensor filter or DSLR walls.
• Don’t use the wand for cleaning without a foam tape attached.
• Don’t apply the wand to the ultra low tack adhesive side.
• Don’t use the foam tapes after a period of one year.
• Don’t try to clean water stains on the sensor with DUST-AID, it wont work.
• Don’t apply the foam tape to the wand’s finger grip.
• Don’t apply the wand to the foam tape without removing the tab.
• Don’t litter the used tabs, foam tape, bag, tin box or wand.
• Don’t use DUST-AID while driving, in the dark or inebriated.
• Don’t use DUST-AID for any other purpose other than it’s intent.
• Don’t drag the wand and tape across the sensor filter, always lean, then lift.
We at DUST-AID know a lot of these “Don’ts” are common sense, but in today’s sue happy world we need it spelled out in black and white. Sorry if we offended your intelligence but we can never be too safe.
Happy shooting with clean sensors! - The DUST-AID Team |
