The first ever micro fiber sensor wipe!
DUST-CLOTH MF’s are made from a very soft weave of micro fiber cloth that has been tested repeatedly not to scratch sensor filters or their coatings.

The main benefit to these micro fiber wipes is that they are designed not to produce loose fibers. If you've ever cleaned with non woven wipes and/or swabs then you know what we are talking about.

The sides of the wipes are heat sealed so fibers can't break free. Seeing that when wrapped you are only using the center part of the wipe, the sealed edge will not come close to the sensor filter.

The Dust-Cloth MF wipes are also more absorbent than regular non-woven wipes which helps to reduce excess cleaning fluid escaping the wipe and seeping under the sensor filter frame.

These wipes are sized 3"x3" due to their thickness. This is plenty of cloth to produce a nice wrap and still have a good sight path to the sensor filter.

• Micro fiber wipes
• 99.999% clean
• Lint free
• 50 count, 3”x3” wipes
• Comes in zip lock bag
• Designed to reduce fiber loss

1: Place wand on middle horizontal line while
being on left side of the vertical line.

2. Fold the top of cloth on the horizontal line.
Grab the top left cloth corner and fold in at
an angle away from the wand tip.

3. Grab the top right cloth corner and fold over
at an angle to wand tip. Make sure the cloth has
sharp folds that are perpendicular to wand tip.

4. Pull the fold over and cinch up the cloth slack.

5: Twist the cloth tight around the wand, making
sure that the folds at the wand tip stay sharp.

6. Place the Cloth Clip on the fold to secure it.

7. When using the wrapped swab, make sure
not to touch the inner sidewalls of the mirror
chamber or you may knock dust free from it.