DUST-AID is an adhesive based digital single lens reflex camera sensor cleaner. It was developed and tested over a sixteen month period using scientific lab testing and real world usage.
Cleaning one's sensor is a scary and daunting task even for photo professionals. DUST-AID was developed to be an easy to use, safe option that will help even the novice, non-technical shooter clean dust off of their sensor.
DUST-AID is comprised into three main elements, the foam tape, the pad and the wand. It also comes with the Canon Cleaner tapes.
• 12 ultra low tack sterile adhesive foam tapes.
• 1 reusable wand in each package.
• FTIR tested and passed contamination analyses.
• Safe for airline security and traveling.
• One size fits all current models of DSLR sensors.
• Does not swipe across the sensor.
• Tin packaging that protects and can be reused.
• Developed by a photographer.
NOTE:
We have received a few reports of the foam tapes being hard to remove from the clear carrier card. We have researched the problem and have diagnosed it. When some of the foam tapes are cut, the sides of the cleaning adhesive tape gets pinched into the cut within the clear carrier card. When you remove a foam tape you can see the cuts on the surface of the card, this is where the sides of the cleaning adhesive tape are being pinched. To remove a pinched foam tape simply bend the clear carrier card down at the point of the foam tape edge and slowly lean the foam tape, with the wand attached, in several directions until you find a direction that allows the side of the foam tape to release from the carrier card.
|
