Canon Cleaner Tapes

The Canon Cleaner tapes are designed to be used with DUST-AID Classic. They are not needed with the new Dust-Aid Platinum Cleaner.

Dust-Aid is now providing Canon Cleaner tapes that greatly reduce the adesive strength of Dust-Aid. The Canon Cleaner tapes are applied to the base of Dust-Aid Classic low tack foam tapes so you can clean the sensor filter as usual. These tapes will greatly reduce the chance of removing weak coatings.

Step 1 Remove white tab from Dust-Aid foam.	Step 2 Apply wand to the top of the Dust-Aid Foam.	Step 3 Expose Canon Cleaner from its bag.
Step 4 Place wand with DA foam onto one Canon Cleaner. Make sure that the Canon Cleaner tape can be seen on all sides of the DA foam.	Step 5 Lean wand and remove Canon Cleaner from liner, you're ready to clean.	Step 6 Clean sensor filter as usual. Discard foam and Canon Cleaner after use.

If your Dust-Aid Classic tin did not come with a Canon Cleaner and you have not used Dust-Aid yet on your Canon, please contact us and we will mail one out to you. Please e-mail us your contact information, your Dust-Aid UPC number on the back of the tin and your camera's model and serial number to service@Dust-Aid.com and we will mail you a Canon Cleaner.

Please contact us at service@Dust-Aid.com with any questions.

The Dust-Aid Team